Interior Paint for Wood
£6.99
Surface recommendation | Doors |
Brand | Johnstone’s |
Colour | Brilliant White |
Unit count | 750 millilitre |
Is waterproof | True |
Finish type | Gloss |
Size | 0.75 Liters |
Item form | Liquid |
Item volume | 750 Millilitres |
Colour code | #676F73 |
About this item
- Johnstone’s Hardwearing Non-Drip Gloss provides a high sheen finish for interior and exterior wood and metal including skirting boards, doors, radiators and staircases. The solvent-based drip-resistant formulation is long-lasting and will minimise mess caused during the painting
- Minimise mess during the painting
- Traditional solvent-based formulation
- Dry time: 16-24 hours
- Coverage (Per litre): 14 m²
-
Product SafetyDanger
- Contains 2-butanone oxime. May produce an allergic reaction.
- Flammable liquid and vapour.
- Repeated exposure may cause skin dryness or crack
Interior Paint for wood
Johnstone’s 306533 – Interior Hardwearing Non-Drip Gloss – Interior Paint – Drip Resistant Formulation – Suitable for Interior and Exterior Wood and Metal – Pure Brilliant White – 0.75 L
Product Description
NON DRIP GLOSS PAINT Johnstone’s Hardwearing Non-Drip Gloss provides a high sheen finish for interior and exterior wood and metal, the trim paint is great on a variety of surfaces such as skirting boards, doors, radiators, and staircases. The drip-resistant formulation is solvent-based and will help minimize mess caused during painting, leaving you with a long-lasting finish.
PREPARATION
All surfaces should be clean, dry, and free from grease. Remove any loose or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Prime bare surfaces with an appropriate Johnstone’s primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
APPLICATION
Ensure maximum ventilation during application and drying. Not recommended for interior use on large surface areas, or in confined spaces. Do not stir. Apply by brush or roller. For best results load the brush or roller. Apply liberally and evenly for a smooth finish, avoid overspreading. Occasionally a small amount of liquid may appear in the tin, if this is not used in the first brush full, remove excess. Under normal conditions allow 16-24 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10’C or in damp conditions. Do not apply over polystyrene surfaces.
CLEANING
Replace lid firmly after use. Remove as much product as possible from application equipment before cleaning. Clean all equipment immediately after use in White Spirit or Turpentine Substitute.
To avoid the risk of spillage, always store and transport in a secure upright position.
Do not empty waste paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Box Contains
1 x container of paint
About this item
- Johnstone’s Hardwearing Non-Drip Gloss provides a high sheen finish for interior and exterior wood and metal including skirting boards, doors, radiators, and staircases. The solvent-based drip-resistant formulation is long-lasting and will minimize mess caused during the painting
- Minimize mess during the painting
- Traditional solvent-based formulation
- Dry time: 16-24 hours
- Coverage (Per liter): 14 m²
-
Product SafetyDanger
- Contains 2-butanone oxime. May produce an allergic reaction.
- Flammable liquid and vapor.
- Repeated exposure may cause skin dryness or crack
There are no reviews yet.